Red front door on a small ranch home under a dark shingle roof

Documented to the Arkansas code, from the deck up

New Construction Roofing in Springdale, AR

On a new Springdale build, a local roofer sets the roof to the Arkansas code, hail-ready from the first season, and writes every spec down before the deck is covered.

Insurance steps laid out in plain English
No pressure to commit on the spot
Workmanship coverage stated in writing

Start my new-build roof fileRoof file · open

On paper before the deck is covered

What new construction roofing documents up front

New construction roofing in Springdale, AR is the one chance to get every detail right and written down before it is buried. The flashing, the underlayment, and every line of the Arkansas code the build has to meet cost little to set now and a great deal to redo later.

A local roofer reads the builder's plans, names every code item and spec on the estimate, and dates each stage as it goes on, so what is under the shingles is on record, not taken on faith. Ask for the workmanship terms in writing too, because those terms are the protection that stands behind the roof.

Scope

What goes on the estimate before the deck

The code items and details a roofer names and dates, before the deck is closed.

S Scope sheet

01Every code line named on the estimate: A new Springdale build answers to the 2021 Arkansas Fire Prevention Code, so a roofer writes the code items the plan has to meet onto the estimate, the covering, the underlayment, and the flashing specified up front, not decided later on the roof.
02Underlayment and flashing set for hail: The underlayment, the drip edge, and the metal at every wall, valley, and vent are set to shed water and take Washington County hail from the first season, with the flashing woven into the covering, never caulked over the top.
03The impact-shingle decision, made at build: A new roof is the cheapest moment to step up to an impact-rated covering for an active-hail county, so a roofer prices the impact shingle against the builder's standard one and puts the choice on the estimate before the deck is covered.
04Each stage photographed and dated: A roofer photographs the decking, the dry-in, and the flashing as each goes on and dates the record, so the parts that end up buried are documented, and the file backs both the workmanship warranty and any future hail claim.

A new build is the one moment these details are cheap to set right. A documented inspection at hand-off confirms the estimate was actually followed, and the storm record shows the hail the roof was built to take.

What to watch for

Reasons our roofers should read the plans first

Any one of these is worth a roofer's read before the deck closes.

You are building in Spring Creek Estates or on the west side and want it documented from day one
The builder's spec sheet names no impact-rated covering for a hail county
You want every code item and the flashing named on the estimate, not assumed
You want each buried layer photographed and dated before it is covered
You plan to stay in the home for decades and want the record kept from the start

Bring a roofer in at any of these points and the fix is a pen stroke on the plan, not a tear-out later.

On a roof here

Why a young Springdale roof still needs a record

A new Springdale roof meets Washington County hail in its first seasons, not decades out, so the covering and flashing it starts with decide how it holds. Building it to the minimum and building it to take hail are two different roofs at nearly the same price.

A local roofer documents the young roof from the deck up, so the dated file that proves it was built to code is the same file that backs a hail claim if a Washington County storm ever tests it.

i On the record

01Hail meets the roof in year one: A new roof still answers to the Washington County hail record, so the storm history is worth reading even on a first-year roof.
02The record starts with the build: A dated file kept from the first day of the build is the cheapest proof a young roof can carry, and it is there the moment a storm or a sale calls for it.

Built to code and documented from the start, a new Springdale roof spends its first hail season keeping water out, with the proof already on file.

Questions

What to ask before your new roof goes on

Straight answers for anyone putting a roof on a new house.

Q1Is a new roof already built to take Springdale hail?

Not always, and that is exactly what a roofer's read is for. A builder-grade spec can meet the code minimum and still put on the cheapest covering and the thinnest flashing, which is exactly what struggles in an active-hail county. A local roofer reads the plan, prices an impact-rated covering against the builder's standard, and names the choice on the estimate before the deck is covered; the shingle guide lays out what the impact rating buys.

Q2Does the roofer on my new build carry the Arkansas registration?

Every roofer sent to your new build already carries it. Arkansas registers residential roofers through the Contractors Licensing Board for any job over $2,000, backed by a $15,000 surety bond, and a larger commercial project needs a separate license, standing conditions of getting the lead, not something you have to verify alone. The permit page walks through the registration and the city permit together.

Q3Does a new roof need its own permit if the whole house is permitted?

The roof is usually covered under the home's building permit, and the roofing work is inspected as part of it. What matters more is that the covering, the flashing, and the underlayment are done to the Arkansas Fire Prevention Code and confirmed on inspection, not just drawn on the plan. A local roofer builds to that and leaves you the dated record.

Q4Why document a brand-new roof at all?

A new roof buries most of what protects it within a day, the underlayment, the flashing, the decking, so once the shingles are on you cannot see whether it was done right. A roofer photographs and dates each layer as it goes on, so the workmanship warranty has proof behind it and a future hail claim starts with a clear before-picture, not a guess.

Q5Does the builder's warranty cover a leak later on?

The answer depends on which warranty you mean. A manufacturer warranty covers the shingle itself, but most new-roof leaks come down to how the flashing and the details were installed, which is workmanship. On a new build the workmanship terms in writing are what stand behind those details, so ask for them and keep them with the roof's paperwork.

Q6Should I upgrade the shingle on a new Springdale build?

An upgrade is worth weighing. Springdale roofs take real Washington County hail, so an impact-rated shingle can earn its price on a roof you plan to keep, and some carriers file a discount for it. A roofer prices the upgrade against the builder's standard covering and puts both on the estimate, so you decide it with the numbers in front of you rather than defaulting to the base spec.

Breaking ground in Springdale?

Get the new roof documented from day one

Building new in Springdale? Send Springdale Apex Roofing the address and the builder's roof plans, and a local roofer reads them for the Arkansas code and Washington County hail, then puts every spec and the workmanship terms on paper before the deck is covered.

Start my new-build roof fileRoof file · open